How much electricity does an average American home use?

What affects the cost of energy in North Carolina?

 

According to the Energy Information Administration of the U.S. Department of Energy:

In 2010, the average annual electricity consumption for a U.S. residential utility customer was 11,496 kWh, an average of 958 kilowatthours (kWh) per month.

 

What does that mean, in practical terms?

North Carolina residents had an average monthly bill of $125.20, based on the 2010 census data and calculated as of November 2011. Read these facts on the EIA website, here.

For many homes, this may not factor in the cost of heating the home, as gas or propane run furnaces have been common for many years.

This also averages the cost for small apartments and large homes together, so may not be a full picture of the cost for a typical single family home.

 

What affects the cost of energy in a North Carolina home?

 

 - The home's energy efficiency:

 - efficient heating/cooling equipment

 - tight construction/ducts (and type of insulation)

 - high-performance windows

 - type of water heater, etc

 

 

 

 - The home's green certification: new homes certified by programs like ENERGY STAR have guarenteed lower energy costs.

  - The size of a home: more square footage = more space to heat, cool, and seal.

  - The price of oil: oil prices not only affect the cost of heating your home if you have a gas furnace, but it also affects the cost of generating electricity.

  - State or Federal tax credits and other incentive programs.

  - Energy provider costs: Duke Energy and Progress Energy are two of the largest energy providers in North Carolina.

 

How can I save money on electricity in my new NC home?

Consider homes with energy saving measures like:

- Better construction practices (even a home that's 5 years old has been built to a much lower energy code than today's new homes, but overall efficiency still depends on the expertise of the home builder)

- Tankless or solar water heaters

- Spray foam insulation

- Superior Wall insulated wall panels in basements

- Energy Star rated lighting, light bulbs, and appliances

- Sealed Crawlspace

and many other ideas.

 

How to save energy in a North Carolina new home - Read more about ENERGY STAR homes and features that can help keep energy costs down

Look inside green built homes, by Stanton Homes

Watch photo tours of some of our most popular green qualified home designs, built by Stanton Homes. You'll find all sorts of energy saving features in these NC custom homes.

 

 

Finding Your New Home in the Raleigh Area 

Stanton Homes makes it easy!  We'll guide you through the entire process - select from thousands of different floor plans, and hundreds of different locations, with a focus on new custom homes in the upper $100s to the $500s. Custom design build options available too!

Call 919-278-8070 or visit www.StantonHomes.com to find out more about new homes in the Raleigh area today. 

Articles copyright Stanton Homes 2006-2011.  Unauthorized use is not permitted.  Provided for informational purposes only, no claims are made by Stanton Homes regarding the validity of any statements.  Please note:  all listing information per MLS, and current as of posting date.  Information subject to change.  Stanton Homes does not make claims to ownership of  any lot listings, but can work with homebuyers to purchase available lots and build.  Home plans to be approved on an individual basis, subject to neighborhood restrictive covenants and lot restrictions.  Ask for further information regarding any community, lot or floor plan.  Photos represent typical homes and details of each neighborhood, to help highlight different options available in the Raleigh/Triangle area.  No claim of ownership is made to homes or land pictured.  

How to Create a Sustainably Green Kitchen

Green Ideas for your Home

The following article is a guest column, courtesy of Douglas Elliman Real Estate Agency, suppling premium Brooklyn Apartments.

Everyone is jumping on the environmental bandwagon, wanting to find ways to reduce his or her carbon footprint and help make the planet healthy for future generations. If you own a home it can be difficult to decide where to begin.

Most families live in the kitchen, and most of your energy costs are generated there, too. It only makes sense to begin “greening” your home in the most popular room in the house.

Water

The easiest thing you can do to conserve water is to install a low-flow faucet in your kitchen sink. It may take a little getting used to, but in time it will more than pay for itself. Fill the sink when you are ready to do the dishes and use the garbage disposal to grind food scraps.

Investing in a new dishwasher is another way to “green” your kitchen. Modern dishwashers heat the water instead of relying on water from the household heater, reducing energy loss through the pipes.

Manufacturer’s tests have shown that even the most frugal hand washers can’t beat new energy-rated appliances, which typically use less than ten gallons of water per cycle.

A few tips: Don’t rinse dishes before loading, only run the machine when it’s fully loaded and skip the dry cycle whenever possible. The water is heated to a high enough temperature to dry the dishes through evaporation if the door is left open after running.

Lighting

Everyone knows that replacing incandescent bulbs with  can reduce energy costs. The problem is that many older kitchens are equipped with tube fluorescents in large fixtures.

You may have to spend a little money to save money.

Have an electrician remove old fixtures and replace them with recessed lighting and LED lamps. While that work is being done, you can also have your kitchen rewired into lighting “zones” with spotlights over work areas including the sink, the stove and the table.

You can reduce energy usage by only lighting the areas where you are working instead of the entire kitchen.

Appliances

The refrigerator is the biggest energy consumer in your home. It runs and cycles 24 hours a day, 365 days a year. When it’s time to replace your refrigerator, consider downsizing. Many of us have much larger refrigerator/freezers than we really need. A smaller unit will save you money.

Also look into energy-rated appliances. They may cost more initially, but the energy savings will pay for them in the long run.

While you’re at it, get rid of the extra machine in the garage. Make sure your fridge is in good working order. If you notice unusual ice buildup in the freezer or you have to crank the dial to keep it cold, have it looked at and repaired or replaced. Improperly working machines must work harder to cool, increasing energy usage and costs.

Gas stoves and ovens are efficient, easy to use and less expensive to operate than electric. If you love the clean look of an electric cook top, make sure to buy an energy efficient induction model.

Cabinets, Countertops and Floors

If your home has been around a few years, you may have solid wood cabinetry in the kitchen that has been obscured by years of varnish or paint. Instead of gutting the entire kitchen, consider refinishing your cabinets. Sanding and re-staining your cabinet doors and adding new hardware can modernize your kitchen with minimal waste.

If you really hate the look of your cabinets, consider replacing only the doors and facings. Incorporating dedicated bins for composting and recycling into your new cabinets will make it convenient to reduce waste. Environmentally friendly composite countertops are available that mimic the look of stone – for a fraction of the price. Sustainable woods like bamboo, high-quality laminates and recycled brick, tile or hardwoods are all earth-friendly choices when replacing floors.

More and more people are interested in reducing their carbon footprints and living an earth-friendly lifestyle. Other than heating and cooling, most of a home’s energy is used in the kitchen. By incorporating “green” features and fixtures into a sustainable kitchen design, you can do something nice for the planet and save money at the same time.

To learn more about New Home "Green Building," click on the links below:

New Home Green Building Features

Green Homes in the Raleigh, NC area

How to get Green Certified: What are the Levels of Certification?

Examples of Energy Star Qualified Stanton Homes

Read about the Energy Star Program

Finding Your New Home in the Raleigh Area 

Stanton Homes makes it easy!  We'll guide you through the entire process - select from thousands of different floor plans, and hundreds of different locations, with a focus on new custom homes in the upper $100s to the $500s. Custom design build options available too!

Call 919-278-8070 or visit www.StantonHomes.com to find out more about new homes in the Raleigh area today. 

Articles copyright Stanton Homes 2006-2011.  Unauthorized use is not permitted.  Provided for informational purposes only, no claims are made by Stanton Homes regarding the validity of any statements.  Please note:  all listing information per MLS, and current as of posting date.  Information subject to change.  Stanton Homes does not make claims to ownership of  any lot listings, but can work with homebuyers to purchase available lots and build.  Home plans to be approved on an individual basis, subject to neighborhood restrictive covenants and lot restrictions.  Ask for further information regarding any community, lot or floor plan.  Photos represent typical homes and details of each neighborhood, to help highlight different options available in the Raleigh/Triangle area.  No claim of ownership is made to homes or land pictured.